Electromagnetic contactors Engard PML, eTS60, etc.

Small-sized contactors PML

They are small-sized, which allows you to save space in the electrical installation cabinet.

Category of application AC-1, AC-3.

They are available in cases of 5 standard sizes depending on the rated operating current.

Rated operating current from 9 to 95 A.

2 versions according to the supply voltage of the control coil – 230 V or 400 V.

The presence of built-in additional contacts: 1NO or 1NZ for contactors from 9 to 32 A, and 1NO+1NZ for contactors from 40 to 95 A.

Mounting both on a standard 35 mm DIN rail and on the mounting plate with screws.

The housing is made of heat-resistant insulating plastic.

The contacts are soldered with silver, which provides low transient resistance and high resistance to destruction during switching.

The core of the control coil is made of high-quality electrical steel.

They have additional devices, which makes it possible to adapt contactors in automatic load control systems.

Comply with GOST R 50030.4.1, IEC 60947-4-1.

Model range see in the technical specifications below.

PML Power contactors

They are available in cases of 8 standard sizes depending on the rated operating current.

Rated operating current from 115 to 630 A.

Category of application AC-1, AC-3.

2 versions according to the supply voltage of the control coil – 230 V or 400 V.

There are factory-assembled reversible models with mechanical locking and power terminals connected by tires in accordance with the reverse engine control scheme.

An additional normally open contact is built into the control coil.

The power contacts are made of a copper-silver composite, which reduces losses on the contact group and increases the service life of the device.

Equipped with a contact system position indicator, which allows you to determine the switching position of the contactor.

They have additional devices, which makes it possible to adapt contactors in automatic load control systems.

Comply with GOST R 50030.4.1, IEC 60947-4-1.

Model range see in the technical specifications below.

Reversible power contactors PML

They are available in cases of 8 standard sizes depending on the rated operating current.

Rated operating current from 115 to 630 A.

Category of application AC-1, AC-3.

2 versions according to the supply voltage of the control coil – 230 V or 400 V.

An additional normally open contact is built into the control coil.

The power contacts are made of a copper-silver composite, which reduces losses on the contact group and increases the service life of the device.

Equipped with a contact system position indicator, which allows you to determine the switching position of the contactor.

They have additional devices, which makes it possible to adapt contactors in automatic load control systems.

Comply with GOST R 50030.4.1, IEC 60947-4-1.

Model range see in the technical specifications below.

Electromagnetic contactors eTS60

They are available in cases of 8 standard sizes depending on the rated operating current.

Rated operating current from 115 to 630 A.

Category of application AC-1, AC-3.

2 versions according to the supply voltage of the control coil – 230 V or 400 V.

There are factory-assembled reversible models with mechanical locking and power terminals connected by tires in accordance with the reverse engine control scheme.

An additional normally open contact is built into the control coil.

The power contacts are made of a copper-silver composite, which reduces losses on the contact group and increases the service life of the device.

Equipped with a contact system position indicator, which allows you to determine the switching position of the contactor.

They have additional devices, which makes it possible to adapt contactors in automatic load control systems.

Comply with GOST R 50030.4.1, IEC 60947-4-1.

Model range see in the technical specifications below.