Disconnector switches Engard eDF60, eDH60, etc.

The disconnector switches are closed eDF60

Closed structure.

They are mounted on the mounting plate.

The control handle is mounted on the front of the switch body or is carried to the door through a special rod.

They are easy to operate and designed for rated operating currents at operating voltage up to 690 V for various categories of applications, including heavy duty motor loads (AC-23A).

The presence of transparent viewing windows in the housing provides a visible break in the chain.

Model range see in the technical specifications below.

Switch-disconnectors folding eDH60

Folding type design for fuses (horizontal arrangement of knife-type fusible inserts).

Designed for switching on/off the load, protection against short circuits and overloads of electrical circuits with a voltage of up to 1000 V with a frequency of 50-60 Hz at currents up to 630 A.

Designed for joint use with industrial fusible inserts in accordance with IEC 60269.

Various mounting options: depending on the rated current, they can be mounted on a mounting plate or DIN rail.

Operation safety: access to the fuse inserts is blocked in the ON position by means of a seal on the cover of the disconnector switch.

Ease of operation: the marking with the technical characteristics of the fusible inserts is clearly visible through the large viewing holes in the lid of the device.

Comply with GOST R 50030.3, IEC 60947-3.

Model range see in the technical specifications below.